BS 200N100 e BSM 200N40

BS 200N100 e BSM 200N40

La misura delle emissioni dei transienti secondo ISO 7637-2 richiede uno switch elettronico ed uno switch meccanico ed una LISN. La soluzione di EM Test consta dello switch elettronico BS 200N100, lo switch meccanico BSM 200N40 e la LISN AN 200N100 conforme a ISO 7637-2, CISPR 25, ISO 11452-4 e CISPR 16-1-2.

Caratteristiche

BS 200N100

  • Electronic switch 60Vdc 100A
  • Voltage drop: <1.2V @100A, <0.2V @25A
  • Max peak voltage: 1000V
  • Reverse polarity and short circuit protected
  • Switching time: 300ns into test load 50uH 0.6Ohm

BSM 200N40

  • Mechanical switch 12/24Vdc 40A
  • Maximum current: 40A @13.5V, 20A @27V

AN 200N100

  • LISN according to ISO 7637-2, CISPR 25 and CISPR 16-1-2
  • Frequency range: 100kHz..125MHz
  • 1000Vdc 250Vac up to 1kHz